Download and print an Indian ring size chart with sizes 1 to 26, diameter and circumference in millimetres, a 50 mm calibration check, and true-size ring circles for comparing an existing ring.
A Printable Ring Size Chart India is a print-ready reference that helps you compare finger or ring measurements with Indian ring sizes before ordering jewellery online or visiting a jeweller. This page includes a downloadable A4 PDF with Indian sizes 1 through 26, diameter and circumference values, a calibration line, and true-size circles designed for checking an existing ring.
The most important part of any printable ring sizing guide is print accuracy. If a browser or printer automatically shrinks a page, even a visually perfect circle can become too small. That is why the PDF on this page includes a 50 mm calibration line. Print at 100% / Actual Size, measure that line with a physical ruler, and only use the ring circles after confirming it is exactly 50 mm.
If you prefer measuring your finger instead of an existing ring, use the circumference column below or try our Finger Size Measurement Tool India. For a complete sizing reference, see the Ring Size Chart India.
The PDF is formatted for A4 paper and contains a full measurement table plus two pages of true-size ring circles. Keep scaling at 100% / Actual Size for accurate circle measurements.
The downloadable PDF continues through size 26 and includes separate true-size circle pages. Preview is illustrative; use the PDF for scale-sensitive printing.
Use standard A4 paper. Portrait orientation is already built into the PDF.
Turn off “Fit to page”, “Shrink oversized pages”, or automatic scaling. These settings can change the circle diameter.
Use a physical ruler. If the line is not exactly 50 mm, correct the print scale and print again.
Place a ring that already fits the intended finger over a circle. Match the inside edge, not the outside metal edge.
Enter circumference or diameter in millimetres and compare the result with the printable PDF.
| Indian Size | Diameter | Circumference | Circumference (in) | Printable Use |
|---|---|---|---|---|
| Indian Size 1 | 13.1 mm | 41.0 mm | 1.61″ | Printable circle on PDF |
| Indian Size 2 | 13.3 mm | 41.7 mm | 1.64″ | Printable circle on PDF |
| Indian Size 3 | 13.7 mm | 42.9 mm | 1.69″ | Printable circle on PDF |
| Indian Size 4 | 13.9 mm | 43.6 mm | 1.72″ | Printable circle on PDF |
| Indian Size 5 | 14.1 mm | 44.2 mm | 1.74″ | Printable circle on PDF |
| Indian Size 6 | 14.5 mm | 45.5 mm | 1.79″ | Printable circle on PDF |
| Indian Size 7 | 14.9 mm | 47.1 mm | 1.85″ | Printable circle on PDF |
| Indian Size 8 | 15.0 mm | 48.0 mm | 1.89″ | Printable circle on PDF |
| Indian Size 9 | 15.4 mm | 49.0 mm | 1.93″ | Printable circle on PDF |
| Indian Size 10 | 15.7 mm | 50.0 mm | 1.97″ | Printable circle on PDF |
| Indian Size 11 | 16.0 mm | 51.2 mm | 2.02″ | Printable circle on PDF |
| Indian Size 12 | 16.4 mm | 51.8 mm | 2.04″ | Printable circle on PDF |
| Indian Size 13 | 16.7 mm | 53.1 mm | 2.09″ | Printable circle on PDF |
| Indian Size 14 | 17.1 mm | 54.0 mm | 2.13″ | Printable circle on PDF |
| Indian Size 15 | 17.4 mm | 55.0 mm | 2.17″ | Printable circle on PDF |
| Indian Size 16 | 17.8 mm | 56.3 mm | 2.22″ | Printable circle on PDF |
| Indian Size 17 | 18.0 mm | 57.0 mm | 2.24″ | Printable circle on PDF |
| Indian Size 18 | 18.4 mm | 57.8 mm | 2.28″ | Printable circle on PDF |
| Indian Size 19 | 18.7 mm | 59.1 mm | 2.33″ | Printable circle on PDF |
| Indian Size 20 | 19.1 mm | 60.0 mm | 2.36″ | Printable circle on PDF |
| Indian Size 21 | 19.4 mm | 60.9 mm | 2.40″ | Printable circle on PDF |
| Indian Size 22 | 19.7 mm | 61.9 mm | 2.44″ | Printable circle on PDF |
| Indian Size 23 | 20.0 mm | 62.8 mm | 2.47″ | Printable circle on PDF |
| Indian Size 24 | 20.4 mm | 63.8 mm | 2.51″ | Printable circle on PDF |
| Indian Size 25 | 20.7 mm | 64.7 mm | 2.55″ | Printable circle on PDF |
| Indian Size 26 | 21.0 mm | 66.0 mm | 2.60″ | Printable circle on PDF |
Use the download button above and open the file in a PDF reader for the most predictable print scaling.
Do not use “Fit” or “Scale to page.” The true-size circles depend on exact physical dimensions.
Measure the calibration line on the printed page. It must be exactly 50 mm before you continue.
The printed circle should align with the ring's inner edge. Ignore the outside edge of the band.
If the ring opening sits between two printed circles, the larger size is usually the safer comfort choice. Confirm with a jeweller when buying an expensive or difficult-to-resize ring.
Use a narrow paper strip or non-stretch thread around the base of the finger. It should be snug but not tight.
Keep the strip level and mark the overlap point precisely.
Lay it flat against a ruler. The measured length is the approximate finger circumference.
Find the nearest circumference in the table above or enter it into the size checker. For more help, open the Find My Ring Size India tool.
A few percent of printer scaling can move the result by one or more sizes. Always verify the calibration line instead of trusting the print dialog alone.
Normal A4 office paper is suitable. Avoid paper that has absorbed moisture, curled, or been resized in a photocopier.
When using an existing ring, compare the empty inner opening. The printed circle should not disappear underneath the metal band.
Different browsers, PDF readers, printers, and mobile print menus may apply automatic scaling. A document can look correct on-screen and still print slightly smaller or larger. The 50 mm line in this downloadable Printable Ring Size Chart India PDF gives you an independent physical check: if your ruler says 50 mm, the ring circles are being printed at the intended scale.
If the line measures 48 mm, 52 mm, or any other value, do not use the ring circles yet. Reopen the print settings, choose “Actual Size” or 100%, disable fit-to-page options, and print again. Some printer drivers also have a second scaling setting inside “Preferences” or “More settings.”
Not reliably. Phone and laptop screens have different pixel densities and zoom levels. A circle displayed as 16 mm in a design file does not automatically appear as 16 physical millimetres on every screen. For a scale-sensitive check, print the PDF and use a ruler for calibration.
| 🇮🇳 India | 🇺🇸 US / Canada | 🇬🇧 UK / Aus | 🇪🇺 EU / ISO |
|---|---|---|---|
| 1 | 1.75 | B | 41 |
| 3 | 2.5 | D | 43 |
| 5 | 3.5 | F½ | 44 |
| 7 | 4.25 | I½ | 47 |
| 9 | 5 | K½ | 49 |
| 11 | 5.75 | M½ | 51 |
| 12 | 6 | N | 52 |
| 13 | 6.5 | O | 53 |
| 14 | 7 | P | 54 |
| 15 | 7.25 | Q | 55 |
| 16 | 7.75 | R | 56 |
| 17 | 8 | S | 57 |
| 18 | 8.5 | T | 58 |
| 19 | 9 | U | 59 |
| 20 | 9.5 | V | 60 |
| 21 | 10 | W | 61 |
| 22 | 10.5 | X | 62 |
| 24 | 11.5 | Z | 64 |
| 26 | 12.5 | Z+2 | 66 |
A printable chart is a practical starting point, but fingers are not rigid cylinders. Finger size changes with temperature, time of day, hydration, activity, and the shape of the knuckle. Measure more than once, especially when the ring is expensive, custom-made, engraved, or difficult to resize.
Do not assume the same finger on both hands is identical. The dominant hand can feel different, and a ring finger may have a larger knuckle than the base. Measure the exact finger on which the ring will be worn.
A ring must pass over the knuckle without falling loose at the base. If the knuckle is noticeably larger, compare both points and choose a size that balances security with comfort.
A broad band covers more skin and can feel snugger than a thin band with the same internal diameter. If you are between sizes and the planned ring has a wide band, the larger size is often more comfortable. A jeweller can advise using a matching-width sizing ring.
Very cold fingers can be temporarily smaller, while heat or exercise can make fingers swell. Measure when your hands feel normal and repeat the measurement at another time before placing a high-value order.
For formal ring-size terminology and professional measurement methods, the Bureau of Indian Standards lists IS 15892:2019 / ISO 8653:2016 — Jewellery — Ring-Sizes — Definition, Measurement and Designation. You can search standards through the BIS Know Your Standard portal.
The international reference is ISO 8653:2016, which covers ring-size measurement and designation. A printable home chart is useful for estimating a consumer size; manufacturing, resizing, and high-value purchases should be confirmed with a calibrated ring gauge or jeweller.